Route

SCPI Commands

ROUTe:WCDMa:SIGNaling<Instance>
class Route[source]

Route commands group definition. 34 total commands, 1 Sub-groups, 1 group commands

class ValueStruct[source]

Structure for reading output parameters. Fields:

  • Scenario: enums.Scenario: SCELl | DCARrier | SCFading | DCFading | SCFDiversity | DCFDiversity | DBFading | DBFDiversity | DCHSpa | TCHSpa SCEL: ‘Standard Cell’ DCARrier: ‘Dual Carrier’ SCFading: ‘Standard Cell Fading’ DCFading: ‘Dual Carrier Fading’ SCFDiversity: ‘Standard Cell RX Diversity Fading’ DCFDiversity: ‘Dual Carrier RX Diversity Fading’ DBFading: ‘Dual Carrier / Dual Band Fading’ DBFDiversity: ‘Dual Carrier / Dual Band RX Diversity Fading’ DCHSpa: ‘Dual Carrier HSPA’ TCHSpa: ‘3C HSPA’

  • Master: str: For future use - returned value not relevant

  • Rx_Connector: enums.RxConnector: RF connector for input path 1

  • Rx_Converter: enums.RxConverter: RX module for input path 1

  • Rx_2_Connector: enums.RxConnector: RF connector for input path 2

  • Rx_2_Converter: enums.RxConverter: RX module for input path 2

  • Tx_Connector: enums.TxConnector: RF connector for output path 1

  • Tx_Converter: enums.TxConverter: TX module for output path 1

  • Tx_2_Connector: enums.TxConnector: RF connector for output path 2

  • Tx_2_Converter: enums.TxConverter: TX module for output path 2

  • Tx_3_Connector: enums.TxConnector: RF connector for output path 2

  • Tx_3_Converter: enums.TxConverter: TX module for output path 2

  • Tx_4_Connector: enums.TxConnector: RF connector for output path 3

  • Tx_4_Converter: enums.TxConverter: TX module for output path 4

  • Iq_Connector: enums.TxConnector: DIG IQ OUT connector for output path 1

  • Iq_2_Connector: enums.TxConnector: DIG IQ OUT connector for output path 2

  • Iq_3_Connector: enums.TxConnector: DIG IQ OUT connector for output path 3

  • Iq_4_Connector: enums.TxConnector: DIG IQ OUT connector for output path 4

  • Fader: enums.Fader: I/Q board with I/Q connectors

get_value() → ValueStruct[source]
# SCPI: ROUTe:WCDMa:SIGNaling<instance>
value: ValueStruct = driver.route.get_value()

Returns the configured routing settings. The number of returned values depends on the active scenario (6 to 18 values) . For possible connector and converter values, see ‘Values for Signal Path Selection’.

return

structure: for return value, see the help for ValueStruct structure arguments.

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.route.clone()

Subgroups