from ..Internal.Core import Core
from ..Internal.CommandsGroup import CommandsGroup
# noinspection PyPep8Naming,PyAttributeOutsideInit,SpellCheckingInspection
[docs]class UplinkLogging:
"""UplinkLogging commands group definition. 27 total commands, 7 Sub-groups, 3 group commands"""
def __init__(self, core: Core, parent):
self._core = core
self._base = CommandsGroup("uplinkLogging", core, parent)
@property
def state(self):
"""state commands group. 1 Sub-classes, 1 commands."""
if not hasattr(self, '_state'):
from .UplinkLogging_.State import State
self._state = State(self._core, self._base)
return self._state
@property
def sfn(self):
"""sfn commands group. 0 Sub-classes, 2 commands."""
if not hasattr(self, '_sfn'):
from .UplinkLogging_.Sfn import Sfn
self._sfn = Sfn(self._core, self._base)
return self._sfn
@property
def slot(self):
"""slot commands group. 0 Sub-classes, 2 commands."""
if not hasattr(self, '_slot'):
from .UplinkLogging_.Slot import Slot
self._slot = Slot(self._core, self._base)
return self._slot
@property
def carrier(self):
"""carrier commands group. 6 Sub-classes, 0 commands."""
if not hasattr(self, '_carrier'):
from .UplinkLogging_.Carrier import Carrier
self._carrier = Carrier(self._core, self._base)
return self._carrier
@property
def scell(self):
"""scell commands group. 0 Sub-classes, 2 commands."""
if not hasattr(self, '_scell'):
from .UplinkLogging_.Scell import Scell
self._scell = Scell(self._core, self._base)
return self._scell
@property
def dcarrier(self):
"""dcarrier commands group. 0 Sub-classes, 2 commands."""
if not hasattr(self, '_dcarrier'):
from .UplinkLogging_.Dcarrier import Dcarrier
self._dcarrier = Dcarrier(self._core, self._base)
return self._dcarrier
@property
def dchspa(self):
"""dchspa commands group. 0 Sub-classes, 2 commands."""
if not hasattr(self, '_dchspa'):
from .UplinkLogging_.Dchspa import Dchspa
self._dchspa = Dchspa(self._core, self._base)
return self._dchspa
[docs] def stop(self) -> None:
"""SCPI: STOP:WCDMa:SIGNaling<instance>:ULLogging \n
Snippet: driver.uplinkLogging.stop() \n
INTRO_CMD_HELP: Starts, stops, or aborts the measurement: \n
- INITiate... starts or restarts the measurement. The measurement enters the 'RUN' state.
- STOP... halts the measurement immediately. The measurement enters the 'RDY' state. Measurement results are kept. The resources remain allocated to the measurement.
- ABORt... halts the measurement immediately. The measurement enters the 'OFF' state. All measurement values are set to NAV. Allocated resources are released.
Use FETCh...STATe? to query the current measurement state. \n
"""
self._core.io.write(f'STOP:WCDMa:SIGNaling<Instance>:ULLogging')
[docs] def stop_with_opc(self) -> None:
"""SCPI: STOP:WCDMa:SIGNaling<instance>:ULLogging \n
Snippet: driver.uplinkLogging.stop_with_opc() \n
INTRO_CMD_HELP: Starts, stops, or aborts the measurement: \n
- INITiate... starts or restarts the measurement. The measurement enters the 'RUN' state.
- STOP... halts the measurement immediately. The measurement enters the 'RDY' state. Measurement results are kept. The resources remain allocated to the measurement.
- ABORt... halts the measurement immediately. The measurement enters the 'OFF' state. All measurement values are set to NAV. Allocated resources are released.
Use FETCh...STATe? to query the current measurement state. \n
Same as stop, but waits for the operation to complete before continuing further. Use the RsCmwWcdmaSig.utilities.opc_timeout_set() to set the timeout value. \n
"""
self._core.io.write_with_opc(f'STOP:WCDMa:SIGNaling<Instance>:ULLogging')
[docs] def abort(self) -> None:
"""SCPI: ABORt:WCDMa:SIGNaling<instance>:ULLogging \n
Snippet: driver.uplinkLogging.abort() \n
INTRO_CMD_HELP: Starts, stops, or aborts the measurement: \n
- INITiate... starts or restarts the measurement. The measurement enters the 'RUN' state.
- STOP... halts the measurement immediately. The measurement enters the 'RDY' state. Measurement results are kept. The resources remain allocated to the measurement.
- ABORt... halts the measurement immediately. The measurement enters the 'OFF' state. All measurement values are set to NAV. Allocated resources are released.
Use FETCh...STATe? to query the current measurement state. \n
"""
self._core.io.write(f'ABORt:WCDMa:SIGNaling<Instance>:ULLogging')
[docs] def abort_with_opc(self) -> None:
"""SCPI: ABORt:WCDMa:SIGNaling<instance>:ULLogging \n
Snippet: driver.uplinkLogging.abort_with_opc() \n
INTRO_CMD_HELP: Starts, stops, or aborts the measurement: \n
- INITiate... starts or restarts the measurement. The measurement enters the 'RUN' state.
- STOP... halts the measurement immediately. The measurement enters the 'RDY' state. Measurement results are kept. The resources remain allocated to the measurement.
- ABORt... halts the measurement immediately. The measurement enters the 'OFF' state. All measurement values are set to NAV. Allocated resources are released.
Use FETCh...STATe? to query the current measurement state. \n
Same as abort, but waits for the operation to complete before continuing further. Use the RsCmwWcdmaSig.utilities.opc_timeout_set() to set the timeout value. \n
"""
self._core.io.write_with_opc(f'ABORt:WCDMa:SIGNaling<Instance>:ULLogging')
[docs] def initiate(self) -> None:
"""SCPI: INITiate:WCDMa:SIGNaling<instance>:ULLogging \n
Snippet: driver.uplinkLogging.initiate() \n
INTRO_CMD_HELP: Starts, stops, or aborts the measurement: \n
- INITiate... starts or restarts the measurement. The measurement enters the 'RUN' state.
- STOP... halts the measurement immediately. The measurement enters the 'RDY' state. Measurement results are kept. The resources remain allocated to the measurement.
- ABORt... halts the measurement immediately. The measurement enters the 'OFF' state. All measurement values are set to NAV. Allocated resources are released.
Use FETCh...STATe? to query the current measurement state. \n
"""
self._core.io.write(f'INITiate:WCDMa:SIGNaling<Instance>:ULLogging')
[docs] def initiate_with_opc(self) -> None:
"""SCPI: INITiate:WCDMa:SIGNaling<instance>:ULLogging \n
Snippet: driver.uplinkLogging.initiate_with_opc() \n
INTRO_CMD_HELP: Starts, stops, or aborts the measurement: \n
- INITiate... starts or restarts the measurement. The measurement enters the 'RUN' state.
- STOP... halts the measurement immediately. The measurement enters the 'RDY' state. Measurement results are kept. The resources remain allocated to the measurement.
- ABORt... halts the measurement immediately. The measurement enters the 'OFF' state. All measurement values are set to NAV. Allocated resources are released.
Use FETCh...STATe? to query the current measurement state. \n
Same as initiate, but waits for the operation to complete before continuing further. Use the RsCmwWcdmaSig.utilities.opc_timeout_set() to set the timeout value. \n
"""
self._core.io.write_with_opc(f'INITiate:WCDMa:SIGNaling<Instance>:ULLogging')
def clone(self) -> 'UplinkLogging':
"""Clones the group by creating new object from it and its whole existing sub-groups
Also copies all the existing default Repeated Capabilities setting,
which you can change independently without affecting the original group"""
new_group = UplinkLogging(self._core, self._base.parent)
self._base.synchronize_repcaps(new_group)
return new_group