Psettings

SCPI Commands

CONFigure:WCDMa:SIGNaling<Instance>:PSETtings:ERGM
CONFigure:WCDMa:SIGNaling<Instance>:PSETtings:HUMP
CONFigure:WCDMa:SIGNaling<Instance>:PSETtings
class Psettings[source]

Psettings commands group definition. 3 total commands, 0 Sub-groups, 3 group commands

class ErgmStruct[source]

Structure for reading output parameters. Fields:

  • Test_Mode: enums.TestMode: HOLD | UPDown ‘Missed Hold’, ‘Missed Up/Down’

  • Tti: enums.TransTimeInterval: M2 | M10 2 ms, 10 ms

get_ergm() → ErgmStruct[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:PSETtings:ERGM
value: ErgmStruct = driver.configure.psettings.get_ergm()

Selects mode and TTI for the ‘E-RGCH Measurement’wizard.

return

structure: for return value, see the help for ErgmStruct structure arguments.

get_hump() → RsCmwWcdmaSig.enums.SubTest[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:PSETtings:HUMP
value: enums.SubTest = driver.configure.psettings.get_hump()

Selects a subtest for the HSUPA maximum output power wizard.

return

sub_test: S1 | S2 | S3 | S4 | S5 Subtest 1 to subtest 5

set_ergm(value: RsCmwWcdmaSig.Implementations.Configure_.Psettings.Psettings.ErgmStruct) → None[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:PSETtings:ERGM
driver.configure.psettings.set_ergm(value = ErgmStruct())

Selects mode and TTI for the ‘E-RGCH Measurement’wizard.

param value

see the help for ErgmStruct structure arguments.

set_hump(sub_test: RsCmwWcdmaSig.enums.SubTest) → None[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:PSETtings:HUMP
driver.configure.psettings.set_hump(sub_test = enums.SubTest.S1)

Selects a subtest for the HSUPA maximum output power wizard.

param sub_test

S1 | S2 | S3 | S4 | S5 Subtest 1 to subtest 5

set_value(selection: RsCmwWcdmaSig.enums.WizzardSelection) → None[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:PSETtings
driver.configure.psettings.set_value(selection = enums.WizzardSelection.DHIP)
Executes the wizard to apply the selected predefined set of WCDMA settings.

INTRO_CMD_HELP: Configure the following selections before executing the wizard:

  • ‘General Settings’

  • HUMP: see method RsCmwWcdmaSig.Configure.Psettings.hump

  • ERGM: see method RsCmwWcdmaSig.Configure.Psettings.ergm

param selection

HDMT | HUMT | HSMT | HUMP | DHIP | ERGM | HCQI | OOS HDMT: HSDPA maximum throughput HUMT: HSUPA maximum throughput HSMT: HSPA maximum throughput HUMP: HSUPA maximum output power DHIP: Dual carrier HSPA inner loop power control ERGM: HSUPA E-RGCH measurement HCQI: HSDPA CQI measurement OOS: Out-of-sync handling