Qam<QuadratureAM>¶

RepCap Settings

# Range: QAM16 .. QAM64
rc = driver.configure.cell.hsdpa.cqi.rvcSequences.qam.repcap_quadratureAM_get()
driver.configure.cell.hsdpa.cqi.rvcSequences.qam.repcap_quadratureAM_set(repcap.QuadratureAM.QAM16)

SCPI Commands

CONFigure:WCDMa:SIGNaling<Instance>:CELL:HSDPa:CQI:RVCSequences:QAM<QuadratureAM>

class Qam[source]

Qam commands group definition. 2 total commands, 1 Sub-groups, 1 group commands Repeated Capability: QuadratureAM, default value after init: QuadratureAM.QAM16

get(quadratureAM=<QuadratureAM.Default: -1>) → RsCmwWcdmaSig.enums.RvcSequence[source]

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:CELL:HSDPa:CQI:RVCSequences:QAM<nr>
value: enums.RvcSequence = driver.configure.cell.hsdpa.cqi.rvcSequences.qam.get(quadratureAM = repcap.QuadratureAM.Default)

Specifies an RV coding sequence to be used for signals with 16-QAM or 64-QAM modulation. If UDEFined is selected, the sequence is defined via method RsCmwWcdmaSig.Configure.Cell.Hsdpa.Cqi.RvcSequences.Qam.UserDefined.set.

param quadratureAM

optional repeated capability selector. Default value: QAM16 (settable in the interface ‘Qam’)

return

sequence: S1 | S2 | S3 | S4 | S5 | S6 | S7 | UDEFined S1: {0} S2: {6} S3: {0, 2, 5, 6} S4: {6, 2, 1, 5} S5: {0, 0, 0, 0} S6: {6, 6, 6, 6} S7: {6, 0, 4, 5} UDEFined: user-defined sequence

set(sequence: RsCmwWcdmaSig.enums.RvcSequence, quadratureAM=<QuadratureAM.Default: -1>) → None[source]

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:CELL:HSDPa:CQI:RVCSequences:QAM<nr>
driver.configure.cell.hsdpa.cqi.rvcSequences.qam.set(sequence = enums.RvcSequence.S1, quadratureAM = repcap.QuadratureAM.Default)

Specifies an RV coding sequence to be used for signals with 16-QAM or 64-QAM modulation. If UDEFined is selected, the sequence is defined via method RsCmwWcdmaSig.Configure.Cell.Hsdpa.Cqi.RvcSequences.Qam.UserDefined.set.

param sequence

S1 | S2 | S3 | S4 | S5 | S6 | S7 | UDEFined S1: {0} S2: {6} S3: {0, 2, 5, 6} S4: {6, 2, 1, 5} S5: {0, 0, 0, 0} S6: {6, 6, 6, 6} S7: {6, 0, 4, 5} UDEFined: user-defined sequence

param quadratureAM

optional repeated capability selector. Default value: QAM16 (settable in the interface ‘Qam’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.cell.hsdpa.cqi.rvcSequences.qam.clone()

Subgroups

UserDefined