Fading

SCPI Commands

CONFigure:WCDMa:SIGNaling<Instance>:HCQI:LIMit:FADing:BLER
CONFigure:WCDMa:SIGNaling<Instance>:HCQI:LIMit:FADing:DTX
class Fading[source]

Fading commands group definition. 2 total commands, 0 Sub-groups, 2 group commands

class BlerStruct[source]

Structure for reading output parameters. Fields:

  • Median_0: float: Limit for the values acquired at median CQI Range: 0 % to 100 %, Unit: %

  • Median_P_3: float: Limit for the values acquired at median CQI + 3 Range: 0 % to 100 %, Unit: %

class DtxStruct[source]

Structure for reading output parameters. Fields:

  • Median_0: float or bool: Limit for the values acquired at median CQI Range: 0 % to 100 % Additional parameters: OFF | ON (disables | enables the limit check)

  • Median_P_3: float or bool: Limit for the values acquired at median CQI + 3 Range: 0 % to 100 % Additional parameters: OFF | ON (disables | enables the limit check)

get_bler() → BlerStruct[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:HCQI:LIMit:FADing:BLER
value: BlerStruct = driver.configure.hcqi.limit.fading.get_bler()

Defines upper BLER limit for fading test case.

return

structure: for return value, see the help for BlerStruct structure arguments.

get_dtx() → DtxStruct[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:HCQI:LIMit:FADing:DTX
value: DtxStruct = driver.configure.hcqi.limit.fading.get_dtx()

Defines the maximum percentage of HSDPA subframes that the UE answers with DTX during fading test case.

return

structure: for return value, see the help for DtxStruct structure arguments.

set_bler(value: RsCmwWcdmaSig.Implementations.Configure_.Hcqi_.Limit_.Fading.Fading.BlerStruct) → None[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:HCQI:LIMit:FADing:BLER
driver.configure.hcqi.limit.fading.set_bler(value = BlerStruct())

Defines upper BLER limit for fading test case.

param value

see the help for BlerStruct structure arguments.

set_dtx(value: RsCmwWcdmaSig.Implementations.Configure_.Hcqi_.Limit_.Fading.Fading.DtxStruct) → None[source]
# SCPI: CONFigure:WCDMa:SIGNaling<instance>:HCQI:LIMit:FADing:DTX
driver.configure.hcqi.limit.fading.set_dtx(value = DtxStruct())

Defines the maximum percentage of HSDPA subframes that the UE answers with DTX during fading test case.

param value

see the help for DtxStruct structure arguments.