Precondition

SCPI Commands

CONFigure:WCDMa:SIGNaling<Instance>:UL:TPCSet:PRECondition:PHDown
CONFigure:WCDMa:SIGNaling<Instance>:UL:TPCSet:PRECondition:PHUP
CONFigure:WCDMa:SIGNaling<Instance>:UL:TPCSet:PRECondition:CONTinuous
CONFigure:WCDMa:SIGNaling<Instance>:UL:TPCSet:PRECondition:SINGle

class Precondition

Precondition commands group definition. 4 total commands, 0 Sub-groups, 4 group commands

get_continuous() → RsCmwWcdmaSig.enums.Condition

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:CONTinuous
value: enums.Condition = driver.configure.uplink.tpcset.precondition.get_continuous()

Select the precondition for ‘Continuous Pattern’.

return

condition: NONE | ALTernating | MAXPower | MINPower | TPOWer

get_phdown() → RsCmwWcdmaSig.enums.ConditionB

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:PHDown
value: enums.ConditionB = driver.configure.uplink.tpcset.precondition.get_phdown()

Select the preconditions for ‘Single Pattern’, ‘Phase Discontinuity Up’ and ‘Phase Discontinuity Down’.

return

condition: ALTernating | MAXPower | MINPower | TPOWer

get_phup() → RsCmwWcdmaSig.enums.ConditionB

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:PHUP
value: enums.ConditionB = driver.configure.uplink.tpcset.precondition.get_phup()

Select the preconditions for ‘Single Pattern’, ‘Phase Discontinuity Up’ and ‘Phase Discontinuity Down’.

return

condition: ALTernating | MAXPower | MINPower | TPOWer

get_single() → RsCmwWcdmaSig.enums.ConditionB

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:SINGle
value: enums.ConditionB = driver.configure.uplink.tpcset.precondition.get_single()

Select the preconditions for ‘Single Pattern’, ‘Phase Discontinuity Up’ and ‘Phase Discontinuity Down’.

return

condition: ALTernating | MAXPower | MINPower | TPOWer

set_continuous(condition: RsCmwWcdmaSig.enums.Condition) → None

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:CONTinuous
driver.configure.uplink.tpcset.precondition.set_continuous(condition = enums.Condition.ALTernating)

Select the precondition for ‘Continuous Pattern’.

param condition

NONE | ALTernating | MAXPower | MINPower | TPOWer

set_phdown(condition: RsCmwWcdmaSig.enums.ConditionB) → None

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:PHDown
driver.configure.uplink.tpcset.precondition.set_phdown(condition = enums.ConditionB.ALTernating)

Select the preconditions for ‘Single Pattern’, ‘Phase Discontinuity Up’ and ‘Phase Discontinuity Down’.

param condition

ALTernating | MAXPower | MINPower | TPOWer

set_phup(condition: RsCmwWcdmaSig.enums.ConditionB) → None

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:PHUP
driver.configure.uplink.tpcset.precondition.set_phup(condition = enums.ConditionB.ALTernating)

Select the preconditions for ‘Single Pattern’, ‘Phase Discontinuity Up’ and ‘Phase Discontinuity Down’.

param condition

ALTernating | MAXPower | MINPower | TPOWer

set_single(condition: RsCmwWcdmaSig.enums.ConditionB) → None

# SCPI: CONFigure:WCDMa:SIGNaling<instance>:UL:TPCSet:PRECondition:SINGle
driver.configure.uplink.tpcset.precondition.set_single(condition = enums.ConditionB.ALTernating)

Select the preconditions for ‘Single Pattern’, ‘Phase Discontinuity Up’ and ‘Phase Discontinuity Down’.

param condition

ALTernating | MAXPower | MINPower | TPOWer