Ganss

SCPI Commands

SENSe:WCDMa:SIGNaling<Instance>:UECapability:UEPosition:GANSs:GALileo
SENSe:WCDMa:SIGNaling<Instance>:UECapability:UEPosition:GANSs:SBAS
SENSe:WCDMa:SIGNaling<Instance>:UECapability:UEPosition:GANSs:MGPS
SENSe:WCDMa:SIGNaling<Instance>:UECapability:UEPosition:GANSs:QZSS
SENSe:WCDMa:SIGNaling<Instance>:UECapability:UEPosition:GANSs:GLONass
SENSe:WCDMa:SIGNaling<Instance>:UECapability:UEPosition:GANSs

class Ganss

Ganss commands group definition. 6 total commands, 0 Sub-groups, 6 group commands

class GalileoStruct

Structure for reading output parameters. Fields:

• Supported: enums.YesNoStatus: NO | YES Indicates if a UE supports the navigation standard indicated by the last mnemonic

• Mode: enums.UeNaviSupport: NONE | NETWork | UE | NUE Indicates if a UE supports the ‘network-based’ and/or ‘UE-based’ navigation standard indicated by the last mnemonic

• Signal_Id: int: The GANSS signal ID encodes the identification of the signal for each GANSS. It depends on the GANSS ID as specified in 3GPP TS 25.331, section 10.3.3.45a.

• Signal_Ids_Ext: int: GANSS signal IDs extension specifies the UE capability to measure on more than one GANSS signal and which signals are supported (see 3GPP TS 25.331, section 10.3.3.45, note 2) .

• Timing_Cell_Frms: enums.YesNoStatus: NO | YES Support of GANSS timing of cell frames measurement

• Carrier_Phase: enums.YesNoStatus: NO | YES Support of GANSS carrier-phase measurement

• Non_Native_Assist: enums.YesNoStatus: NO | YES Support of non-native assistance choices

• Sbas_Id: int: Coding is specified in 3GPP TS 25.331, section 10.3.3.45, note 1. This parameter is only available for SBAS standard.

class GlonassStruct

Structure for reading output parameters. Fields:

• Supported: enums.YesNoStatus: NO | YES Indicates if a UE supports the navigation standard indicated by the last mnemonic

• Mode: enums.UeNaviSupport: NONE | NETWork | UE | NUE Indicates if a UE supports the ‘network-based’ and/or ‘UE-based’ navigation standard indicated by the last mnemonic

• Signal_Id: int: The GANSS signal ID encodes the identification of the signal for each GANSS. It depends on the GANSS ID as specified in 3GPP TS 25.331, section 10.3.3.45a.

• Signal_Ids_Ext: int: GANSS signal IDs extension specifies the UE capability to measure on more than one GANSS signal and which signals are supported (see 3GPP TS 25.331, section 10.3.3.45, note 2) .

• Timing_Cell_Frms: enums.YesNoStatus: NO | YES Support of GANSS timing of cell frames measurement

• Carrier_Phase: enums.YesNoStatus: NO | YES Support of GANSS carrier-phase measurement

• Non_Native_Assist: enums.YesNoStatus: NO | YES Support of non-native assistance choices

• Sbas_Id: int: Coding is specified in 3GPP TS 25.331, section 10.3.3.45, note 1. This parameter is only available for SBAS standard.

class MgpsStruct

Structure for reading output parameters. Fields:

• Supported: enums.YesNoStatus: NO | YES Indicates if a UE supports the navigation standard indicated by the last mnemonic

• Mode: enums.UeNaviSupport: NONE | NETWork | UE | NUE Indicates if a UE supports the ‘network-based’ and/or ‘UE-based’ navigation standard indicated by the last mnemonic

• Signal_Id: int: The GANSS signal ID encodes the identification of the signal for each GANSS. It depends on the GANSS ID as specified in 3GPP TS 25.331, section 10.3.3.45a.

• Signal_Ids_Ext: int: GANSS signal IDs extension specifies the UE capability to measure on more than one GANSS signal and which signals are supported (see 3GPP TS 25.331, section 10.3.3.45, note 2) .

• Timing_Cell_Frms: enums.YesNoStatus: NO | YES Support of GANSS timing of cell frames measurement

• Carrier_Phase: enums.YesNoStatus: NO | YES Support of GANSS carrier-phase measurement

• Non_Native_Assist: enums.YesNoStatus: NO | YES Support of non-native assistance choices

• Sbas_Id: int: Coding is specified in 3GPP TS 25.331, section 10.3.3.45, note 1. This parameter is only available for SBAS standard.

class QzssStruct

Structure for reading output parameters. Fields:

• Supported: enums.YesNoStatus: NO | YES Indicates if a UE supports the navigation standard indicated by the last mnemonic

• Mode: enums.UeNaviSupport: NONE | NETWork | UE | NUE Indicates if a UE supports the ‘network-based’ and/or ‘UE-based’ navigation standard indicated by the last mnemonic

• Signal_Id: int: The GANSS signal ID encodes the identification of the signal for each GANSS. It depends on the GANSS ID as specified in 3GPP TS 25.331, section 10.3.3.45a.

• Signal_Ids_Ext: int: GANSS signal IDs extension specifies the UE capability to measure on more than one GANSS signal and which signals are supported (see 3GPP TS 25.331, section 10.3.3.45, note 2) .

• Timing_Cell_Frms: enums.YesNoStatus: NO | YES Support of GANSS timing of cell frames measurement

• Carrier_Phase: enums.YesNoStatus: NO | YES Support of GANSS carrier-phase measurement

• Non_Native_Assist: enums.YesNoStatus: NO | YES Support of non-native assistance choices

• Sbas_Id: int: Coding is specified in 3GPP TS 25.331, section 10.3.3.45, note 1. This parameter is only available for SBAS standard.

class SbasStruct

Structure for reading output parameters. Fields:

• Supported: enums.YesNoStatus: NO | YES Indicates if a UE supports the navigation standard indicated by the last mnemonic

• Mode: enums.UeNaviSupport: NONE | NETWork | UE | NUE Indicates if a UE supports the ‘network-based’ and/or ‘UE-based’ navigation standard indicated by the last mnemonic

• Signal_Id: int: The GANSS signal ID encodes the identification of the signal for each GANSS. It depends on the GANSS ID as specified in 3GPP TS 25.331, section 10.3.3.45a.

• Signal_Ids_Ext: int: GANSS signal IDs extension specifies the UE capability to measure on more than one GANSS signal and which signals are supported (see 3GPP TS 25.331, section 10.3.3.45, note 2) .

• Timing_Cell_Frms: enums.YesNoStatus: NO | YES Support of GANSS timing of cell frames measurement

• Carrier_Phase: enums.YesNoStatus: NO | YES Support of GANSS carrier-phase measurement

• Non_Native_Assist: enums.YesNoStatus: NO | YES Support of non-native assistance choices

• Sbas_Id: int: Coding is specified in 3GPP TS 25.331, section 10.3.3.45, note 1. This parameter is only available for SBAS standard.

class ValueStruct

Structure for reading output parameters. Fields:

• Galileo: enums.YesNoStatus: NO | YES Indicates if a UE supports Galileo standard

• Sbas: enums.YesNoStatus: NO | YES Indicates if a UE supports the satellite-based augmentation system

• Modernized_Gps: enums.YesNoStatus: NO | YES Indicates if a UE supports the modernized global positioning system

• Qzss: enums.YesNoStatus: NO | YES Indicates if a UE supports the quasi-zenith satellite system

• Glonass: enums.YesNoStatus: NO | YES Indicates if a UE supports the global navigation satellite system

get_galileo() → GalileoStruct

# SCPI: SENSe:WCDMa:SIGNaling<instance>:UECapability:UEPosition:GANSs:GALileo
value: GalileoStruct = driver.sense.ueCapability.uePosition.ganss.get_galileo()

Returns UE capability information related to the navigation standards indicated by the last mnemonic: Galileo, global navigation satellite system (GLONASS) , modernized global positioning system (GPS) , quasi-zenith satellite system (QZSS) , satellite-based augmentation system (SBAS)

return

structure: for return value, see the help for GalileoStruct structure arguments.

get_glonass() → GlonassStruct

# SCPI: SENSe:WCDMa:SIGNaling<instance>:UECapability:UEPosition:GANSs:GLONass
value: GlonassStruct = driver.sense.ueCapability.uePosition.ganss.get_glonass()

Returns UE capability information related to the navigation standards indicated by the last mnemonic: Galileo, global navigation satellite system (GLONASS) , modernized global positioning system (GPS) , quasi-zenith satellite system (QZSS) , satellite-based augmentation system (SBAS)

return

structure: for return value, see the help for GlonassStruct structure arguments.

get_mgps() → MgpsStruct

# SCPI: SENSe:WCDMa:SIGNaling<instance>:UECapability:UEPosition:GANSs:MGPS
value: MgpsStruct = driver.sense.ueCapability.uePosition.ganss.get_mgps()

Returns UE capability information related to the navigation standards indicated by the last mnemonic: Galileo, global navigation satellite system (GLONASS) , modernized global positioning system (GPS) , quasi-zenith satellite system (QZSS) , satellite-based augmentation system (SBAS)

return

structure: for return value, see the help for MgpsStruct structure arguments.

get_qzss() → QzssStruct

# SCPI: SENSe:WCDMa:SIGNaling<instance>:UECapability:UEPosition:GANSs:QZSS
value: QzssStruct = driver.sense.ueCapability.uePosition.ganss.get_qzss()

Returns UE capability information related to the navigation standards indicated by the last mnemonic: Galileo, global navigation satellite system (GLONASS) , modernized global positioning system (GPS) , quasi-zenith satellite system (QZSS) , satellite-based augmentation system (SBAS)

return

structure: for return value, see the help for QzssStruct structure arguments.

get_sbas() → SbasStruct

# SCPI: SENSe:WCDMa:SIGNaling<instance>:UECapability:UEPosition:GANSs:SBAS
value: SbasStruct = driver.sense.ueCapability.uePosition.ganss.get_sbas()

Returns UE capability information related to the navigation standards indicated by the last mnemonic: Galileo, global navigation satellite system (GLONASS) , modernized global positioning system (GPS) , quasi-zenith satellite system (QZSS) , satellite-based augmentation system (SBAS)

return

structure: for return value, see the help for SbasStruct structure arguments.

get_value() → ValueStruct

# SCPI: SENSe:WCDMa:SIGNaling<instance>:UECapability:UEPosition:GANSs
value: ValueStruct = driver.sense.ueCapability.uePosition.ganss.get_value()

Returns UE capability information related to the Galileo and additional navigation satellite systems (GANSS) .

return

structure: for return value, see the help for ValueStruct structure arguments.